NOTE: These universal panels are suitable for most windows, but not for all. We have more than 40 different sizes and 3 different colors, so if you need other sizes or colors, ask.
The double glazed window includes accessories (handle, arms, aluminum hinge inserted in the plate).
The photo is only representative of the glass, does not correspond to the measurements in insertion.
EUROPA windows feature: window with RIGHT UPPER AND ROUNDED UPPER CORNERS and aluminum hinge not embedded inside but all around the upper side (as in the picture).
Description: these universal glasses can replace most of the glass assembled on the windows of the campers/caravans, even with regard to windows that are no longer manufactured because they are out of production.
Technical information: double glass in 3mm cast methacrylate with 2mm doubling plus anodised aluminum hinge. Complete with accessories for assembly.
Packaging information: The glasses are individually packed in cardboard boxes, with foam protection.
BEFORE PURCHASING: 1) Check that the design of your glass panel is similar to that of the photo in the ad; in particular, check that the upper corners are at right angles (90 °), the lower ones are rounded and that the aluminum hinge is NOT recessed inside the same window but wraps it around the upper side . If this is not the case, read the instructions at the end of the announcement to find out which type of universal window may be the most suitable for you.
2)) If you are not sure, send some photos of your window to firstname.lastname@example.org . If you no longer have the window, send the images of the other windows of your camper, you need to understand the model.
3) Measure the window hole (W width and H height), as described below and check that the measurements are the same as those of the announcement (WxH).
4) Check that all the corners of your window hole are curved and not at a right angle (as shown in the illustration below).
5) Keep in mind that this is a universal window and, depending on your window, it does not always appear to be perfectly the same, so it may be that you may have to make some simple adjustments. For example, it may happen that the positions of the handles are not the same, in which case the latching blocks should be moved, or it may happen that the position of the latching rail of the window must also be moved. In any case, they are always simple adaptations for everyone.
How to take measurements
The measures of the windows are taken on the shell hole of the wall of the Camper/Caravan in width from inside gasket to internal gasket and in height always from inside gasket to inside gasket AS DRAWING, obviously the measures will be approximately approximately 1 cm lower.
Differences between the Universal models
Universal Windows EUROPA: window with RIGHT AND LOWER ROUND UPPER CORNERS. The aluminum hinge is not embedded inside and wraps around the upper side. The window is supplied without counter zipper when compatible with the existing one on your Camper/Caravan.
Universal windows OCEANIA: window with RIGHT AND LOWER ROUND UPPER CORNERS. The aluminum hinge is not embedded inside and wraps around the upper side. The window is supplied with a counter-hinge to be installed on your Camper/Caravan.
ASIA Universal Windows: window with ALL AND FOUR RIGHT CORNERS. The aluminum hinge is not embedded inside and wraps around the upper side. The window is supplied with a counter-hinge to be installed on your Camper/Caravan.
Universal windows AFRICA: window with ALL AND FOUR ROUNDED CORNERS. The aluminum hinge is embedded inside. The window is supplied with a counter-hinge to be installed on your Camper/Caravan.