PLEASE NOTE: These universal panels are suitable for most windows, but not for all. We have more than 20 different sizes and 3 different colors (anthracite, gray or brown), so if you need other sizes or colors, ask.
The double-glazed window is supplied complete with an aluminum hinge to be mounted on the vehicle so that it can be interchanged with all other types of windows that have similar aesthetic characteristics. In the package you will also find all the accessories needed for assembly (handle, arms).
The photo is only representative of the glass, it does not correspond to the insertion measurements.
ASIA windows feature: window with ALL THE FOUR CORNERS and an aluminum hinge protruding into the two from the two corners (as shown in the photo).
Description: these universal glasses can replace most of the glasses mounted today on camper/caravan windows (also with regard to windows that are no longer manufactured because they are out of production), provided that all the accessories of which the window is used are used supplied, including the aluminum profile to be installed on the body of the camper/caravan.
Technical information: double methacrylate 3mm cast glass with 2mm doubling plus anodized aluminum hinge.
Packaging information: The glasses are individually packed in cardboard boxes, with protection.
BEFORE YOU BUY:
1) Check that the design of your glass panel is similar to that of the photo in the announcement: in particular check that the upper and lower corners are at right angles (90 °) (as in the photo). If this is not the case, read the instructions at the end of the announcement to understand which type of universal window may be the most suitable for your case.
2)) If you are not sure, send some photos of your window to [email protected] If you no longer have the window, send the images of the other windows of your camper, it serves to understand the model.
3) Measure the window hole (W width and H height), as described below and check that the measurements are the same as those of the announcement (WxH).
4) Check that all the corners of your window hole are curved and not at right angles (as shown in the illustration below).
5) Keep in mind that this is a universal window and, depending on your window, it is not always the same, so it may be that you may need to make some simple adjustments. For example, it could happen that the positions of the handles are not the same, in which case it would be necessary to move the coupling blocks, or it could happen that the position of the window coupling track should also be moved. In any case, they are always simple adaptations for everyone.
How to take measurements
The window sizes are taken on the body shell of the Camper/Caravan wall in width from inside the gasket to inside the gasket and in height always from inside the gasket to inside the gasket AS FROM DRAWING, obviously the measurements will be approximately 1 cm lower.
Differences between Universal models
EUROPA windows: window with RIGHT AND LOWER ROUNDED CORNERS. The aluminum hinge is not recessed inside and wraps around the upper side and is almost always compatible with the profile of the original windows of the same type.
OCEANIA windows: window with RIGHT AND LOWER ROUNDED CORNERS. The aluminum hinge wraps around the entire upper side and protrudes over the two corners, is not compatible with any profile of other windows and therefore needs to install its own.
ASIA windows: window with ALL AND FOUR RIGHT CORNERS. The aluminum hinge wraps around the entire upper side and protrudes over the two corners, is not compatible with any profile of other windows and therefore needs to install its own.
AFRICA windows: window with ALL AND FOUR ROUNDED CORNERS. The aluminum hinge is recessed inside.