PLEASE NOTE: These universal panels are suitable for most Windows, but not all. We have more than 20 different sizes and 3 different colors (black, grey or brown), so if you need other sizes or colors, please ask.
Double glazed window comes complete with aluminium fixings to assemble on the vehicle so that it can be interchangeable with all other window types that have similar characteristics. In the package you will also find all the accessories for mounting necessri (handle, stays).
The photo is only representative of the glass, not the same size in the listing.
Feature Windows OCEANIA:window with TOP CORNERS ROUNDED BOTTOM CORNERS, and recessed aluminium hinge inside (as shown).
Description: these glasses are universal can replace much of the glass mounted today on the Windows of camper/caravan, even with respect to Windows that are not manufactured anymore because discontinued.
Technical information: double glass cast methacrylate 3 mm 2 mm anodized aluminium hinge doubling most.
Packaging information: The glasses are packaged individually in cardboard boxes, with protective foam.
BEFORE YOU BUY:
1) make sure that the design of your glass panel is similar to that of the photo in the ad: in particular check that the upper corners are at right angles (90°), the bottom corners are rounded (not upright) and that the top hinge in aluminium is encased in the same window (as shown). If not, read the directions at the end of the ad to find out which type of universal window may be the one best suited to your case.
2) If you are unsure, please send some pictures of your window to firstname.lastname@example.org. If you no longer have the window, send pictures of other Windows of your camper, serves to understand the model.
3) measured the hole window (width W and height H) as described below and verify that the measurements are the same as those of the ad (WxH).
4) make sure all corners of your hole window are curved and not at a right angle (as shown in the figure below).
5) keep in mind that this is a universal and, depending on your window, not always be perfectly equal, so it can be that you may have to do some simple adjustments. For example it could happen that the positions of the handles are not the same, in which case it would be necessary to move blocks of engagement, or it may happen that you have to move the location of the track window docking. In any case are always simple adjustments within everyone's reach.
How to take measurements
The measurements of the Windows take on hole wall shell Camper/Caravan in width from inside inner seal gasket and internal seal gasket height always inside AS SHOWN in the DRAWING, of course the measures will be approximately about 1 cm lower.
Differences between the universal models
Universal Windows: window with RIGHTEOUS and LOWER CORNERS rounded. The aluminium hinge is not encased inside and wraps around the entire top side
Universal Windows OCEANIA: window with RIGHTEOUS and LOWER CORNERS rounded. The aluminum zippers are embedded inside.
Universal Windows ASIA: window with all four RIGHT ANGLES. The aluminum zippers are embedded inside.
Universal AFRICA Windows:window with all four corners rounded. The aluminum zippers are embedded inside.